When Should the RAM be Upgraded in a Laptop, is it Very Easy to Complete?

by Graham Kelly
http://www.trilogicuk.co.uk

Random access memory is normally shortened to RAM is found inside of a laptop and is critical for software programs to run efficiently. When there is inadequate RAM then several software will frequently not run at all or may run very slowly. Every time a laptop is switched off the RAM will get rid of all its contents, thus it only provides a short-term store for data when the laptop is fired up. Generally, a person will upgraded RAM to boost the quantity of programs that can be effectively run on a laptop; occasionally however RAM will go wrong, and is substituted to correct a problem on a laptop.

You should be using an antistatic wrist band prior to touching any of the internal components of a laptop; this may be purchased quite inexpensively from nearly all electronic retail outlets. Remember too to detach the power pack and battery from your laptop prior to starting. The laptop RAM is generally situated within a plastic or metal inspection door on the underside of the laptop; you will need a small Philips screw driver to undo the anchoring screws and open the door to reveal the RAM chip or chips. Unfortunately, a number of older laptops have their only or an supplemental RAM chip situated beneath the keyboard. You may want to have an expert to take out and change this chip as keyboard removal calls for a lot more knowledge than inspect door removal. Never use extreme force when taking off the inspection door or keyboard.

Before you start a RAM update it's important to identify how much RAM is already present. This can be accomplished in two ways; either by extracting and analyzing the existing RAM chips or by looking in the System Setting located in the Control Panel of Windows. In most cases you should always try to double the amount RAM capacity, if at all possible by utilizing two identical RAM chips. As an example, when you have an individual 512mb of RAM inside your laptop then you should aim to have 2x 512mb chips creating a total of 1gb following the upgrade. In the event the current RAM comprises of 2x chips then both must be removed and two brand new identical RAM chips acquired and fitted. There are exceptions but most laptops are more effective with two matching chips instead of a pair of mixed capacity RAM chips. All RAM is withdrawn by pushing two plastic or metal side tabs and detaching the chip; putting in the brand new chips is the reverse.

There are three kinds of RAM chip presently available on modern day laptops; DDR1,2 and 3. Also there are various speeds of RAM chip. When upgrading your laptop it is necessary that the right form of chip is used; they all have a separate connection so trying to use the wrong one would definitely harm the connector on the laptop. The speed of the chip is not really extremely important, however it would be a good idea to buy the same speed as is suggested. This data is found on the vendor's internet site and most RAM chip retailers have information on which chip is essential for every single model and make of laptop. Once you've put the chips in their sockets examine carefully that they are uniformly affixed; replace the inspection door, battery and power pack and switch on your laptop. Hopefully its going to power up; if so , be sure the RAM shown matches up with the amount of RAM put in. If not then turn off the laptop and look once more that the chips are set up perfectly.

Enhancing the RAM on a laptop is generally a cheap approach to boost its efficiency however proper care must be taken as forcing a RAM chip into a socket may trigger a high priced repair to the laptop.

Graham Kelly has been restoring laptops, notebooks and pcs at component level for quite some time. You might want to make contact with him at Trilogic UK Ltd for broken laptop screen or broken RAM stick.

Article submitted Friday, October 21, 2011 & read 5 times.

Please log in to leave your comments.
No comments yet.

0-0-0-0-1-ADSO

Most Recent